dmesg - Fujitsu Lifebook T935 www.mirkopizii.com
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.3.3-040303-lowlatency (kernel@tangerine) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #201512150130 SMP PREEMPT Tue Dec 15 06:37:16 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x0000000000068fff] usable
BIOS-e820: [mem 0x0000000000069000-0x000000000006bfff] reserved
BIOS-e820: [mem 0x000000000006c000-0x000000000008bfff] usable
BIOS-e820: [mem 0x000000000008c000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000aa44efff] usable
BIOS-e820: [mem 0x00000000aa44f000-0x00000000aa6befff] type 20
BIOS-e820: [mem 0x00000000aa6bf000-0x00000000acc3efff] reserved
BIOS-e820: [mem 0x00000000acc3f000-0x00000000acd9efff] ACPI NVS
BIOS-e820: [mem 0x00000000acd9f000-0x00000000acdfefff] ACPI data
BIOS-e820: [mem 0x00000000acdff000-0x00000000acdfffff] usable
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024dffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by Phoenix Technologies Ltd.
efi: ACPI=0xacdfe000 ACPI 2.0=0xacdfe014 SMBIOS=0xacb01000
SMBIOS 2.7 present.
DMI: FUJITSU LIFEBOOK T935/FJNB288, BIOS Version 1.10 03/13/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x24e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-through
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B0000000 mask 7FF0000000 uncachable
2 base 00AE000000 mask 7FFE000000 uncachable
3 base 00AD000000 mask 7FFF000000 uncachable
4 base 00ACE00000 mask 7FFFE00000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xace00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000005f000] 5f000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fe5000, 0x02fe5fff] PGTABLE
BRK [0x02fe6000, 0x02fe6fff] PGTABLE
BRK [0x02fe7000, 0x02fe7fff] PGTABLE
init_memory_mapping: [mem 0x24de00000-0x24dffffff]
[mem 0x24de00000-0x24dffffff] page 2M
BRK [0x02fe8000, 0x02fe8fff] PGTABLE
init_memory_mapping: [mem 0x240000000-0x24ddfffff]
[mem 0x240000000-0x24ddfffff] page 2M
init_memory_mapping: [mem 0x220000000-0x23fffffff]
[mem 0x220000000-0x23fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xaa44efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xaa3fffff] page 2M
[mem 0xaa400000-0xaa44efff] page 4k
init_memory_mapping: [mem 0xacdff000-0xacdfffff]
[mem 0xacdff000-0xacdfffff] page 4k
BRK [0x02fe9000, 0x02fe9fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x21fffffff]
[mem 0x100000000-0x21fffffff] page 1G
RAMDISK: [mem 0x33fd8000-0x35fe3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000ACDFE014 000024 (v02 FUJ )
ACPI: XSDT 0x00000000ACDFE1C0 0000C4 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: FACP 0x00000000ACDF9000 00010C (v05 FUJ PC 010A0000 FUJ 00000001)
ACPI: DSDT 0x00000000ACDE4000 010C4F (v02 FUJ FJNB288 010A0000 INTL 20120711)
ACPI: FACS 0x00000000ACD9A000 000040
ACPI: SSDT 0x00000000ACDFD000 00090E (v01 FUJ SataAhci 00000001 INTL 20120711)
ACPI: SSDT 0x00000000ACDFC000 000106 (v02 FUJ DockSsdt 00000001 INTL 20120711)
ACPI: ASF! 0x00000000ACDFB000 0000A5 (v32 FUJ PC 010A0000 FUJ 00000001)
ACPI: HPET 0x00000000ACDF8000 000038 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: LPIT 0x00000000ACDF7000 000094 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: APIC 0x00000000ACDF6000 000098 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: MCFG 0x00000000ACDF5000 00003C (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: SSDT 0x00000000ACDE3000 000225 (v02 FUJ sensrhub 010A0000 INTL 20120711)
ACPI: SSDT 0x00000000ACDE2000 000539 (v02 FUJ Cpu0Ist 010A0000 INTL 20120711)
ACPI: SSDT 0x00000000ACDE1000 000BD3 (v02 FUJ CpuSsdt 010A0000 INTL 20120711)
ACPI: SSDT 0x00000000ACDDB000 005142 (v02 FUJ SaSsdt 010A0000 INTL 20120711)
ACPI: UEFI 0x00000000ACDDA000 000042 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: TCPA 0x00000000ACDD9000 000032 (v02 PTL CRESTLN 06040000 00005A52)
ACPI: MSDM 0x00000000ACCE6000 000055 (v03 FUJ PC 010A0000 FUJ 00000001)
ACPI: BATB 0x00000000ACDD8000 000046 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: FPDT 0x00000000ACDD7000 000064 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: SLIC 0x00000000ACDD6000 000176 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: UEFI 0x00000000ACDD5000 00030A (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: BGRT 0x00000000ACDD4000 000038 (v01 FUJ PC 010A0000 FUJ 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024dffffff]
NODE_DATA(0) allocated [mem 0x24dff9000-0x24dffdfff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880245600000-ffff88024d5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000024dffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x0000000000068fff]
node 0: [mem 0x000000000006c000-0x000000000008bfff]
node 0: [mem 0x0000000000100000-0x00000000aa44efff]
node 0: [mem 0x00000000acdff000-0x00000000acdfffff]
node 0: [mem 0x0000000100000000-0x000000024dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000024dffffff]
On node 0 totalpages: 2065367
DMA zone: 64 pages used for memmap
DMA zone: 70 pages reserved
DMA zone: 3975 pages, LIFO batch:0
DMA32 zone: 10834 pages used for memmap
DMA32 zone: 693328 pages, LIFO batch:31
Normal zone: 21376 pages used for memmap
Normal zone: 1368064 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x00069000-0x0006bfff]
PM: Registered nosave memory: [mem 0x0008c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xaa44f000-0xaa6befff]
PM: Registered nosave memory: [mem 0xaa6bf000-0xacc3efff]
PM: Registered nosave memory: [mem 0xacc3f000-0xacd9efff]
PM: Registered nosave memory: [mem 0xacd9f000-0xacdfefff]
PM: Registered nosave memory: [mem 0xace00000-0xadffffff]
PM: Registered nosave memory: [mem 0xae000000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xf80f7fff]
PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
e820: [mem 0xb0000000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88024dc00000 s97688 r8192 d29288 u262144
pcpu-alloc: s97688 r8192 d29288 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033023
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7799440K/8261468K available (8176K kernel code, 1250K rwdata, 3900K rodata, 1396K init, 1300K bss, 462028K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.878 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.75 BogoMIPS (lpj=2593878)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.SSP3] Namespace lookup failure, AE_NOT_FOUND (20150818/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150818/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:DockSsdt) while loading table (20150818/tbxfload-193)
ACPI Error: 1 table load failures, 6 successful (20150818/tbxfload-214)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81e97000 - ffffffff81e9e000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 31162 entries in 122 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20751.02 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xacc3f000-0xacd9efff] (1441792 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 22:20:46, date: 12/23/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 13 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880243E48000 001186 (v02 FUJ Win8Ssdt 00000001 INTL 20120711)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880243D92800 000433 (v02 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880243D93000 0005AA (v02 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880243E6C000 000119 (v02 PmRef ApCst 00003000 INTL 20120711)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xd1230000-0xd1233fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd1220000-0xd122ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd123b000-0xd123b01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd1200000-0xd121ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd123d000-0xd123dfff]
pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd1234000-0xd1237fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd1238000-0xd12387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd123a000-0xd123a0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:5249] type 00 class 0xff0000
pci 0000:02:00.0: reg 0x10: [mem 0xd1100000-0xd1100fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xd1100000-0xd11fffff]
pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xd1000000-0xd1001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xd1000000-0xd10fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x2a, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x00069000-0x0006ffff]
e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
e820: reserve RAM buffer [mem 0xaa44f000-0xabffffff]
e820: reserve RAM buffer [mem 0xace00000-0xafffffff]
e820: reserve RAM buffer [mem 0x24e000000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0880-0x08ff] has been reserved
system 00:00: [io 0x0900-0x097f] has been reserved
system 00:00: [io 0x0980-0x09ff] has been reserved
system 00:00: [io 0x0a00-0x0a7f] has been reserved
system 00:00: [io 0x0a80-0x0aff] has been reserved
system 00:00: [io 0x0b00-0x0b7f] has been reserved
system 00:00: [io 0x0b80-0x0bff] has been reserved
system 00:00: [io 0x1640-0x164f] has been reserved
system 00:00: [io 0x1800-0x18fe] could not be reserved
system 00:00: [io 0x1880-0x18ff] has been reserved
system 00:00: [io 0xf800-0xf87f] has been reserved
system 00:00: [io 0xf880-0xf8ff] has been reserved
system 00:00: [io 0xfc00-0xfc7f] has been reserved
system 00:00: [io 0xfc80-0xfcff] has been reserved
system 00:00: [io 0xfd00-0xfd6f] has been reserved
system 00:00: [io 0x2000-0x207f] has been reserved
system 00:00: [io 0x2080-0x20ff] has been reserved
system 00:00: [io 0x0604-0x0607] has been reserved
system 00:00: [io 0x0600-0x0603] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs FUJ0300 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN1f09 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:07: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved
system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xd1100000-0xd11fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xd1000000-0xd10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
pci_bus 0000:02: resource 1 [mem 0xd1100000-0xd11fffff]
pci_bus 0000:03: resource 1 [mem 0xd1000000-0xd10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32816K (ffff880033fd8000 - ffff880035fe4000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9dcc4000-0xa1cc4000] (64MB) mapped at [ffff88009dcc4000-ffff8800a1cc3fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1d
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1d
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1d
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1450909246.655:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0x1A, rev-id 16)
ACPI: Battery Slot [CMB1] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.3-040303-lowlatency xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.3.3-040303-lowlatency xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 78b6de2f0a53cf87c68a62555d5e44065cda95a1'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
evm: HMAC attrs: 0x1
Magic number: 11:372:351
rtc_cmos 00:01: setting system clock to 2015-12-23 22:20:47 UTC (1450909247)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1396K (ffffffff81d3a000 - ffffffff81e97000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 4K (ffff8800027ff000 - ffff880002800000)
Freeing unused kernel memory: 196K (ffff880002bcf000 - ffff880002c00000)
usb 1-4: new full-speed USB device number 2 using xhci_hcd
random: systemd-udevd urandom read with 17 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-4: device descriptor read/64, error -71
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e4:7f:b2:22:cd:51
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
e1000e 0000:00:19.0 enp0s25: renamed from eth0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xd1238000 port 0xd1238100 irq 43
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2593.994 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
usb 1-4: New USB device found, idVendor=056a, idProduct=501f
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: MultiTouch Sensor
usb 1-4: Manufacturer: Wacom Co.,Ltd.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: SAMSUNG MZ7TE256HMHP-00007, EXT0306Q, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TE256 306Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-5: new high-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=04b4, idProduct=6570
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB2.0 Hub
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-6: new high-speed USB device number 4 using xhci_hcd
usb 1-6: config 1 has an invalid interface number: 8 but max is 3
usb 1-6: config 1 has no interface number 1
usb 1-6: config 2 has an invalid interface number: 12 but max is 1
usb 1-6: config 2 has an invalid interface number: 13 but max is 1
usb 1-6: config 2 has an invalid interface number: 13 but max is 1
usb 1-6: config 2 has no interface number 0
usb 1-6: config 2 has no interface number 1
usb 1-6: New USB device found, idVendor=1199, idProduct=9041
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: EM8805
usb 1-6: Manufacturer: Sierra Wireless, Incorporated
usb 1-5.1: new high-speed USB device number 5 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5646], y [..4664]
usb 1-5.1: New USB device found, idVendor=04f2, idProduct=b3b4
usb 1-5.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5.1: Product: FJ Camera
usb 1-5.1: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-5.1: SerialNumber: 0x0001
psmouse serio1: synaptics: queried min coordinates: x [1372..], y [1262..]
usb 1-7: new full-speed USB device number 6 using xhci_hcd
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x122800/0x0, board id: 2845, fw id: 1499226
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2: new full-speed USB device number 7 using xhci_hcd
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-5.2: New USB device found, idVendor=138a, idProduct=0050
usb 1-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-5.2: SerialNumber: ea16ffa1fe7f
usb 1-8: new full-speed USB device number 8 using xhci_hcd
usb 1-8: New USB device found, idVendor=0483, idProduct=91d1
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: ST_SENSOR_HUB
usb 1-8: Manufacturer: STMicroelectronics
usb 1-8: SerialNumber: ST_SENSOR_HUB
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Wacom Co.,Ltd. MultiTouch Sensor Finger as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:056A:501F.0001/input/input8
wacom 0003:056A:501F.0001: hidraw0: USB HID v1.11 Device [Wacom Co.,Ltd. MultiTouch Sensor ] on usb-0000:00:14.0-4/input0
input: Wacom Co.,Ltd. MultiTouch Sensor Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:056A:501F.0002/input/input10
wacom 0003:056A:501F.0002: hidraw1: USB HID v1.11 Device [Wacom Co.,Ltd. MultiTouch Sensor ] on usb-0000:00:14.0-4/input1
usb 1-5.3: new full-speed USB device number 9 using xhci_hcd
usb 1-5.3: New USB device found, idVendor=0b97, idProduct=7761
usb 1-5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.3:1.0: USB hub found
hub 1-5.3:1.0: 4 ports detected
usb 1-5.3.2: new full-speed USB device number 10 using xhci_hcd
usb 1-5.3.2: New USB device found, idVendor=0b97, idProduct=7772
usb 1-5.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.3.2: Product: O2Micro CCID SC Reader
usb 1-5.3.2: Manufacturer: O2
usb 1-5.3.2: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
floppy0: no floppy controllers found
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Slices.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Huge Pages File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
systemd[1]: ureadahead.service: Unit entered failed state.
systemd[1]: ureadahead.service: Failed with result 'exit-code'.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
systemd-journald[272]: Received request to flush runtime journal from PID 1
random: nonblocking pool is initialized
input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input13
fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
fujitsu_laptop: BTNI: [0x0]
fujitsu_laptop: driver 0.6.0 successfully loaded
fujitsu_tablet: Fujitsu Siemens P/T Series
input: Fujitsu FUJ02BF as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/FUJ02BF:00/input/input14
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
usbcore: registered new interface driver btusb
snd_hda_codec_realtek hdaudioC1D0: ALC283: SKU not ready 0x909701f0
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
usbcore: registered new interface driver cdc_ncm
media: Linux media interface: v0.10
usbcore: registered new interface driver cdc_wdm
Linux video capture interface: v2.00
Bluetooth: hci0: read Intel version: 370810011003110e0f
Bluetooth: hci0: Intel device is already patched. patch num: 0f
cdc_mbim 1-6:2.12: cdc-wdm0: USB WDM device
cdc_mbim 1-6:2.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-6, CDC MBIM, b6:ee:54:28:e5:f3
usbcore: registered new interface driver cdc_mbim
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-16.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2
uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b3b4)
iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
input: FJ Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Adding 8260604k swap on /dev/sda8. Priority:-1 extents:1 across:8260604k SSFS
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
audit: type=1400 audit(1450909233.672:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.672:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.674:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.674:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.674:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.674:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.684:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.684:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=538 comm="apparmor_parser"
audit: type=1400 audit(1450909233.684:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=538 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
floppy0: no floppy controllers found
wlp3s0: authenticate with 00:0c:f6:37:c0:89
wlp3s0: direct probe to 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: direct probe to 00:0c:f6:37:c0:89 (try 2/3)
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 3/3)
wlp3s0: authenticated
iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
wlp3s0: associate with 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: RX AssocResp from 00:0c:f6:37:c0:89 (capab=0x401 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
wlp3s0: deauthenticating from 00:0c:f6:37:c0:89 by local choice (Reason: 3=DEAUTH_LEAVING)
wlp3s0: authenticate with 00:0c:f6:37:c0:89
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: authenticated
iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
wlp3s0: associate with 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: RX AssocResp from 00:0c:f6:37:c0:89 (capab=0x401 status=0 aid=2)
wlp3s0: associated
wlp3s0: authenticate with 00:0c:f6:37:c0:89
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 2/3)
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 3/3)
wlp3s0: authentication with 00:0c:f6:37:c0:89 timed out
wlp3s0: authenticate with 00:0c:f6:37:c0:89
wlp3s0: direct probe to 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: direct probe to 00:0c:f6:37:c0:89 (try 2/3)
wlp3s0: direct probe to 00:0c:f6:37:c0:89 (try 3/3)
wlp3s0: authentication with 00:0c:f6:37:c0:89 timed out
wlp3s0: authenticate with 00:0c:f6:37:c0:89
wlp3s0: direct probe to 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 2/3)
wlp3s0: send auth to 00:0c:f6:37:c0:89 (try 3/3)
wlp3s0: authenticated
iwlwifi 0000:03:00.0 wlp3s0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:03:00.0 wlp3s0: disabling VHT as WMM/QoS is not supported by the AP
wlp3s0: associate with 00:0c:f6:37:c0:89 (try 1/3)
wlp3s0: associate with 00:0c:f6:37:c0:89 (try 2/3)
wlp3s0: RX AssocResp from 00:0c:f6:37:c0:89 (capab=0x401 status=0 aid=2)
wlp3s0: associated
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
perf interrupt took too long (2533 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
perf interrupt took too long (5019 > 5000), lowering kernel.perf_event_max_sample_rate to 25000